#Set up udmx artnet driver
#Set up udmx artnet manual

Type in the start universe value universe numbers always start from 1. Left-click OK when you have finished typing in the IP address.

In this example the IP address for a GrandMA lighting desk is being typed in.

#Set up udmx artnet manual

Left-click Manual address to open the Select Remote Node window and type in the IP address of the device. This property has no function for USBbased protocols (Soundlight, Ezdmx). Ethernetbased protocols (Artnet, Enttec, Wendi) identify each physical device with a different IP address. Left-click IP-address to open the IP address editor.

#Set up udmx artnet driver

Select Artnet from the list of driver converter types. This is a lighting control protocol supported by Color Kinetics devices. This is a USB based protocol communicating with Avolites EZDMX devices. This is a USB based protocol communicating with DMX devices made by Soundlight Inc. This is the protocol supported by the popular Enttec Datagate conversion devices. Server B (Actor) NIC B labeled 'B - sACN 1Gbit'

Server B (Actor) NIC B labeled 'B - Artnet 1Gbit' (NICВ BВ will not receive DMX) Server A (Director) NIC B labeled 'B - sACN 1Gbit' Note that the name of the adapter that is being used to transmit the sACN signal must be labeled the same way on each of the servers in the network in order to connect properly. When selecting an adapter for multicast traffic in the disguise software, it loads the list of the adapters present on the local machine. Unlike Art-Net, which is a broadcast (or unicast)В protocol, sACN is a multicast protocol and can transmit up to 63,999 Universes of control data via an ethernet network. Streaming-ACN, also known as ANSI E.1 31-2016, is an alternate DMX-over-Ethernet protocol that is supported by disguise. In light of this change, users will now need to be more specific when entering remote IP addresses, ensuring that either the correct unicast address or the subnetвЂ™s broadcast address is used. This means that disguise is now more strict regarding which IP address it will receive data from, as opposed to the previous behaviour in which it would listen to the entire subnet. WeвЂ™ve modified the way we manage Art-Net/sACN connections to allow for more precise layering of DMX data. Example - if the node's IPВ is 2.0.0.1 and the net mask is 255.0.0.0 then the broadcast IP will be 2.255.255.255. To do Art-Net Broadcast, set the remote IP of the device to be the broadcast address of the network. Art-Net can transmit up to 32,768 Universes of data via a single ethernet cable. called DMX Color Output.This is the most commonly used DMX-over-ethernet protocol. There is also a helper module for sending RGB color data with an optional W component. In this case, ChannelВ designates the first channel where the data structure begins. For these select, a 16-bit Mode, either Big or Little Endian as expected by the device.Д«y using DMX Array OutputВ module you can also describe a structure of several input data occupying a number of consecutive channels. But some devices expect 16-bit values (0 - 65535) layed out into two consecutive DMX channels. You have to send scalar values between 0 and 1 into the ValueВ property.Д«y default, these are converted into an 8-bit value (0 - 255) and sent to the specified DMX channel. Here you also have to choose a specific ChannelВ within a Net/Subnet/Universe. If you open the dropdown list of their Device property the available ArtNet nodes on your network will be populated automatically. In your compound, you can use the DMX * OutВ modules to send control to a selected device.